ST1000C : Security, fire and control power supply
12VA 1 amp
230V to 12V
Compact enclosure pictured
The “ST” is a range of linear power supplies designed to power a variety of equipment used primarily in the security, fire, CCTV and access control industries. The ST. 1000 is the 12 volt, 1 amp model.
The power supplies, which cover a range of 1 to 8 amp versions, are available in either 12 or 24 volt models and can be supplied in a selection of different housing options .
They are designed to give a total output of 1 amp at 13.8 volts DC which includes recharging a sealed lead acid battery via the flying leads.
| Price for 1+: | £20.00 each. |
| Price for 5+: | £18.75 each. |
| Delivery: | Multiple fused output versions available |
| Weight: | 222.00 kg. |
- A proven general purpose DC linear power supply for use in the security, fire and associated industries.
- Available in a range of steel enclosures; compact, horizontal, vertical, large or unboxed.
- Tied tested and proven since 1994
- Over 100,000 installed throughout Europe
- Own branded by numerous major security companies
- High level of regulation and stabilisation
- Manual battery test buttom accessible from outside enclosure
- Variety of amperages 1,2,3,5,6,8 Amp
- Available as 12 or 24 volt
- Battery charging circuit current limited
- Dual options available with AC/DC outputs
- Own brand corporate decal available (bulk or off call orders only)
- Enhanced version available with battery deep discharge cut-off and main fail relay output
- Variable pot for precise voltage setting
 |
 |
| Mains Input | 220 - 240V AC @ 50 Hz, 3 amp Max. |
| Output | The 1 amp @ 13.8 volts DC Total output includes allowing 500mA for battery charging so load must not exceed 500mAmps. |
| Ripple | 100millivolt peak to peak |
| Battery recommended | 12 volt, 7 amp/hour |
| Battery recharge | 24 hours (80% in 14 hours) |
| Environment Range | -10 to + 25 deg. C. |
| INDICATIONS | ______________________________ |
| LED –Green | Mains healthy when on. |
| LED – Red | DC output fuse blown when on |
| LED – Yellow | Battery Fault (when Battery Test button used) |
| FUSES | ______________________________ |
| Mains Safety Fuseblock | F 3.15 amp H 250V |
| Load Output Fuse | F 1 amp L 250V |
| Battery Fuse | F 5 amp L 250V |
