RX-4-2 : 4 way splitter box
4 way splitter box
(4 x 16 amp outlet sockets)
4.2 metre input lead
| Price for 1+: | £13.09 each. |
| Price for 5+: | £12.68 each. |
| Price for 25+: | £12.27 each. |
| Price for 50+: | £11.86 each. |
| Price for 100+: | £11.45 each. |
| Weight: | 3.00 kg. |
- This 16 amp 110V 4 way splitter box is for use on building sites running a reduced voltage system
- 16 amp input plug
- 4 x 16 amp output sockets
- Tough steel frame
- Manufactured to BS5733
- Made in China
| Voltage | 110V |
| Amps | 16 amps |
| Input | 110V BS1363 plug |
| Output | 4 x 110V IP44* BSEN60309 16 amp panel mounting sockets with weatherproof covers |
| Dimensions | Height 180mm x Width 270mm x Depth 250mm |
Currently Out Of Stock
*IP Rating System (“Ingress Protection” code)Is the standard relating to the performance of enclosures in resisting the ingress of water and foreign objects.
BS EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code).
Following the IP tag are two numbers. Eg: IP68
The first relates to the protection offered by the enclosure to solid objects and dust.
0 - Non-protected
1 - Protected against solid foreign objects of 50 mm diameter and greater
2 - Protected against solid foreign objects of 12.5 mm diameter and greater
3 - Protected against solid foreign objects of 2.5 mm diameter and greater
4 - Protected against solid foreign objects of 1.0 mm diameter and greater
5 - Dust-protected
6 - Dust-tight
The second number indicates the protective qualities of the enclosure to the ingress of water.
0 - Non-protected
1 - Protected against vertically falling water drops
2 - Protected against vertically falling water drops as the enclosure is tilted 15 degrees
3 - Protected against spraying water
4 - Protected against splashing water
5 - Protected against water jetting
6 - Protected against powerful water jetting
7 - Protected against temporary immersion
8 - Protected against continuous immersion
BASIC SAFETY
Before using this equipment and to avoid personal injury, carefully read and understand these instructions. If there is anything you do not understand. DO NOT use this equipment, seek advise.
Make sure you are aware of all safety requirements and that this equipment is suitable for the task you wish to undertake.
The work area must be cordoned off from the general public and bystanders.
Persons who are under the influence of alcohol or drugs must not operate this equipment.
You must perform a risk assessment before using this equipment to ensure your safety and the safety of others.
Wear the correct personal protective equipment for the task ahead.
Do not wear loose jewellery or clothing that may get in the way of your work.
Inform everyone in the area of what you are doing.
Always switch OFF the unit when cleaning, making adjustments or when left unattended.
Carefully inspect the equipment before use, if there is any doubt about its condition, DON'T USE IT. Check specifically for damage to casing, power sockets and leads.
ELECTRICAL SAFETY
Fully unwind and loosely coil all extension leads. Position them away from the equipment where they will be protected from water, sharp objects and where they will not pose a trip hazard.
Keep the equipment dry; protect this equipment from damp or wet conditions.
For additional safety always use an RCD between the transformer and the item being powered.
Switch the power OFF before plugging into the supply.
