RE116110 : Extension lead
16 amp 14 metre 110V Heavy duty extension lead
| Price for 1+: | £18.56 each. |
| Price for 5+: | £17.63 each. |
| Price for 25+: | £16.70 each. |
| Price for 50+: | £16.24 each. |
| Price for 100+: | £15.78 each. |
| Weight: | 2.00 kg. |
- This 110V extension lead is for use on building sites running a reduced voltage system
- 16 amp input plug
- 16 amp IP44* output socket
- Manufactured to BS4343 / IEC309
- Made in China
| Voltage | 110V |
| Maximum power input | 16 amps |
| Input | 110V BS1363 / IEC309 plug |
| Output | 110V IP44* BSEN60309 / IEC309 16 amp socket with weatherproof cover |
| Length | 14 metres |
| Cable temperature range | -30 to 70 degrees C |
| Cable diameter | 1.5mm |
Is the standard relating to the performance of enclosures in resisting the ingress of water and foreign objects.
BS EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code).
Following the IP tag are two numbers. Eg: IP68
The first relates to the protection offered by the enclosure to solid objects and dust.
0 - Non-protected
1 - Protected against solid foreign objects of 50 mm diameter and greater
2 - Protected against solid foreign objects of 12.5 mm diameter and greater
3 - Protected against solid foreign objects of 2.5 mm diameter and greater
4 - Protected against solid foreign objects of 1.0 mm diameter and greater
5 - Dust-protected
6 - Dust-tight
The second number indicates the protective qualities of the enclosure to the ingress of water.
0 - Non-protected
1 - Protected against vertically falling water drops
2 - Protected against vertically falling water drops as the enclosure is tilted 15 degrees
3 - Protected against spraying water
4 - Protected against splashing water
5 - Protected against water jetting
6 - Protected against powerful water jetting
7 - Protected against temporary immersion
8 - Protected against continuous immersion
BASIC SAFETY
Before using this equipment and to avoid personal injury, carefully read and understand these instructions. If there is anything you do not understand. DO NOT use this equipment, seek advise.
Make sure you are aware of all safety requirements and that this equipment is suitable for the task you wish to undertake.
The work area must be cordoned off from the general public and bystanders.
Persons who are under the influence of alcohol or drugs must not operate this equipment.
You must perform a risk assessment before using this equipment to ensure your safety and the safety of others.
Wear the correct personal protective equipment for the task ahead.
Do not wear loose jewellery or clothing that may get in the way of your work.
Inform everyone in the area of what you are doing.
Carefully inspect the cable before use, if there is any doubt about its condition, DON'T USE IT. Check specifically for damage to power sockets and lead.
ELECTRICAL SAFETY
Fully unwind and loosely coil all extension leads. Position them away from the equipment where they will be protected from water, sharp objects and where they will not pose a trip hazard.
Keep the lead dry; protect this equipment from damp or wet conditions.
For additional safety always use an RCD between the transformer and the item being powered.
Switch the power OFF before plugging into the supply.
